Tile mosaics can look amazing, and it looks extremely trendy nowadays - that's why you can see them pretty often these days.
If you love this look, then it's pretty easy to do it on your own - you just need to do everything right.
Here's how you can make your bathroom pretty.
Decide on the mosaic design you want. You can draw it on the bathroom wall as a guide.
Ensure the bathroom wall is clean, dry, and free of any debris. Smooth out any bumps or imperfections.
Use a trowel or spatula to spread tile adhesive or thin-set mortar on a small area of the wall. Make sure it's even and not too thick.
Start placing your tiles on the adhesive, following your design.
Use tile spacers to maintain even gaps between tiles. Press each tile firmly into the adhesive.
If your design requires smaller or oddly shaped tiles, use a tile cutter to trim the tiles to fit.
Allow the adhesive to dry for the time recommended on the product label. It's essential to wait until it's completely set.
Mix the grout according to the instructions. Use a grout float to spread it over the tiles, pressing it into the gaps. Be sure to fill all the spaces.
After about 15-20 minutes, when the grout starts to set but isn't completely dry, use a damp sponge to wipe away excess grout from the tile surfaces.
Rinse the sponge frequently.
Once the grout is completely dry (usually after 24-48 hours), use a clean, damp cloth to wipe off any remaining grout residue from the tiles.
Tiles tend to look expensive and lux, so if you want to improve your bathroom's aesthetics, then try doing it on your own.
The main thing is to do everything carefully without hurrying - and your design will make you happy.