Content
How quickly lime and rust accumulate in an iron: the exact timing depends on the water used
25.04.2024 01:00
Updated: 13.05.2024 21:26
Rust on an iron is a common problem.
In this article, we will tell you where rust comes from and how to get rid of it.
Why does an iron leave rusty stains
The higher the water hardness level in your area, the faster scale forms.
If not properly cleaned, limescale will harden.
The steam output is reduced and flakes come out of the steam iron, leaving white or brown marks on your clothes.
Therefore, it is harmful not only to the iron, but also to the integrity of your clothes.
How to get rid of rust in an iron
The easiest way to get rid of scale or rust in an iron is to use table vinegar.
Dilute this in a ratio of 1:3 with water and pour it inside the iron.
After this, you need to warm up the device to maximum and press the steam release several times.
It is advisable to do this over a sink.
Rust can also be removed using special anti-rust products.
To do this, you will need to heat the iron, turn it over, and pour the product into the holes of the sole.
After this, dirt and rust will begin to come out.
When everything is out, clean the appliance and wipe all surfaces with a dry cloth.
Why does rust appear on the iron
The reasons for the appearance of scale, burnout and activation of corrosion processes can be various factors.
For example, an increased content of hardness salts, calcium and magnesium due to the lack of water softening filters.
Rust can also appear due to an increased concentration of iron and copper salts in the water.
Previously, we told you how to get rid of paint smell in your home.
