If you're not careful enough, then you can get your pipes severely clogged - it happens to almost everyone at least once.
While in most cases you have to call a professional to fix this problem, you can also try fixing it on your own.
Here are some things you can try to help your clogged pipes.
Plunger
For sinks, tubs, and showers, use a plunger designed for flat surfaces. Ensure there's enough water in the fixture to cover the rubber part of the plunger.
Place the plunger over the drain and push down firmly, then pull up quickly. Repeat this motion several times.
If it's a double sink, block one side while plunging the other.
Boiling Water
Boil a large pot of water and carefully pour it directly into the drain.
This can help dissolve soap scum, grease, and other substances causing the clog. Repeat as needed.
Baking Soda and Vinegar
Start by pouring about 1/2 cup of baking soda down the drain, followed by 1/2 cup of vinegar.
Cover the drain with a cloth or stopper to contain the fizzing reaction. Wait for 15-30 minutes, then flush the drain with hot water.
Wire Hanger or Drain Snake
If you suspect the clog is deeper in the pipe, straighten out a wire coat hanger and create a small hook on one end.
Gently insert it into the drain, wiggle it around, and pull it out to remove debris.
Alternatively, use a drain snake (available at hardware stores) to reach deeper into the pipe and break up the clog.
Chemical Cleaners (with Caution)
If you opt for a chemical cleaner, follow the manufacturer's instructions carefully.
Keep in mind that these can be harsh on pipes and the environment, so use them sparingly and as a last resort.
P-Trap Removal
If other methods fail and the clog seems to be in the P-trap (the U-shaped pipe under the sink), you can try removing it.
Place a bucket underneath to catch any water or debris. Once removed, clear the clog and then reattach the P-trap.
