To remove construction dust, take a microfiber cloth and soak it in a weak solution of water and vinegar or salt. This composition will help get rid of white stains.
The polyurethane foam is removed when it has dried. To do this, use various hard sponges and other abrasive materials.
How to clean
Wipe the surface with soapy water.
Wipe the floor with a mixture of water and salt (take 100 grams of sodium chloride for a five-liter bucket of water).
If after these manipulations there are still stains on the floor, you should pour 100 milliliters of vinegar into a solution of salt and water.
Wash the floor with the resulting mixture.
How to wash the floor after puttying
One of the popular solvents that can be used on laminate flooring is white spirit.
An acid solution will help remove limescale stains and add shine.
Most stains can be removed with an alcohol-based window cleaner.
A steam cleaner can only be used to clean floors laid using the adhesive method.
How to lay floors during renovation
Finished floors (parquet, laminate, etc.) are covered during repairs with two layers of rags and on top with sheets of hardboard - overlapping with a large margin (there will be little cardboard to protect the floor during repairs).
The edges of the hardboard are taped to prevent anything accidentally spilled from flowing in there.
How to cover tiles during renovation
Typically, thick film or cardboard is used for this matter.
You can make the latter from old boxes, so you don’t even have to spend money and think about how to cover the parquet during repairs.
Nevertheless, if you want to provide high-quality protection, then it is better to take care of good and reliable materials.
What to put on the floor when painting walls
It is better to cover the floor adjacent to the wall with film or thick paper.
In addition, not just lay them down, but be sure to glue them to the floor with masking tape.
If this is not done, when the painter moves during painting, the film will certainly be pulled up.